Structure Bolts/ Hex Bolts / Heavy Hex Ranges from 4 mm to 48 mm, 3/16″ to 2″Availabe in Plain, Zinc, HDG Material Mild Steel, 8.8,10.9,B7. Stainless Steel

Carriage Bolts Ranged from 3/16 to 1″  Length from 1/2 inch to 20″and 6mm to 16 mm Lenght from 10 mm To 500mm  Available in zinc, bare , HDG Finish

Timber Bolts availble in HOT DIP FINISH from Sizes 1/2 Inch to I Inch and Lenght from 8 Inch to 48inch or any Customised Length

Flange Bolts availble from Dia 3/16″ to 5/8″ and 6 mm to 16mm Grades A307, B7 , Stainless Steel . 4.6,8.8,10.9

Roofing Bolts Available  from 6 mm to 16 mm  in Finsih Bare, Zinc, HDG and Lenght as Per Requirement,

Anchor Bolts available from 12 mm to 48 MM and 1/2inch to 2″ And Length as per Requirements.Finsh Self, Zinc, HOT DIP Galvanised.

Manufacturing Hex Nuts From 3 MM to 100 mm, 3/16″ to 4 ” In Low Carbon, Medium Carbon, High Tensile Available in HDG, Plain, Zinv , Black

Manufacturing Flange Nuts From 3 MM to 16 mm, 3/16″ to 5/8 ” In Low Carbon, Medium Carbon, High Tensile Available in HDG, Plain, Zinv , Black

Square Nuts Availble from 6 mm to 24mm. 1/4″ to 1″ Material Mild Steel, Medium Carbon 

Coupling Nuts Availble From 6mm To 24 MM , 1/4 inch to 1″ With Hole As well. Lenght as per Requirements,

Tie Rods Availbel in Lenght 10 Ft to 20 Ft in Hot Dip Finsh size Range from 5/8 to 1inch Dia with Hex Nut Attached

Thread Rods Avaiable in UNC, UNF, MM, Acme from DIA 4 Mm to 48mm and 10# to 2″ In Finish Plain, HDG, Yellow . Material Staineless Steel , B7, ASTM A307, 4.6 From Lenghth upto 20 Ft Long

High Tensile Coil Rod is a continuous threaded rod, made from high carbon, cold rolled, 1045 steel. The Coil Rod is manufactured in high-tensile strength in 12 ft standard lengths, in 1/2″, 3/4″, 1″, 1-1/4″ and 1-1/2″ diameters.

Tie Rods Available in Grade 55,75 Depends upon Requirement and Lenght from 10 ft to 20 Ft in HDG Finish Diameter From 5/8 Inch to 1inch With Nuts Assemble

Customer-Specific Studs with Any Thread and Available Sizes in Any Finish are Manufactured by Us.

Plain Washer is Availble from# mm To 100 MM , 3/16 to 4″ As Per Din 125,127,DIn 9021 , U Strut Super Flat Washer, SAE Washer, Finsih HDG, Zinc

We have Range of  Bearing Plate of any Sizes in HDG Finish.

We have Range of Square Washer  of any Sizes in HDG Finish.

We are manufacture of Beveal Washer in Mild Steel, Medium Carbon, Stainless Steel as per your Requirements,

Manufacturing Spring Washer as Per Requirement Availabel in Mild Steel, Stainless Steel, Spring Steel

DTI Washer Available as Per Customer Requirements,